Archive and Studio Cutfiles created by OldSchoolDM at Cardboard Warriors (and @OldSchoolDM on Twitter)

Artwork and original model by ShadowWolf: http://mmiparchive.papermakeit.com/13%20-%20Fantasy%20Naval.html

The Mast I included came directly from Grendelsmother64's Viking ship as contributed to the boards here: http://cardboard-warriors.proboards.com/index.cgi?board=newartists&action=print&thread=2544
The only mod I made was to make it have a hexagonal footprint as an option and to provide a deck cut that fit the hexagonal mast. 

Afet and CowboyLand each released enlarged versions that you can find on this thread: http://cardboard-warriors.proboards.com/index.cgi?board=cowboyleland&action=print&thread=3366

I had a slight preference for Afet's blowup, and so I created these Studio cut files. Since the model is free, I embedded Afet's blowups directly into the file - so print them from Studio to add the appropriate registration marks.

These files have been printed and cut by me personally, so if you encounter any problems, blame me. :-)

Still missing from the kit:
 1) Never got around to the oars (PDF included in this archive) I didn't need them and I'm lazy. Anyone that wants to send a cutfile for this to me, reply to the thread containing this archive and I'll add it.
 2) Cutfiles for Afet's lower deck described on the original thread. Since you have to glue in the upper deck, I don't get how to use them.

Afet's build used the mast from WWG's The Maiden, http://www.worldworksgames.com/store/index.php?view=product&product=24 which is copyrighted material and is not included in this kit neither as a PDF or a cutfile.

So far, there are no instructions for this build. You'll need to overlap the decking and also the sides a compatible amount, so build the hull first and then the decking, hand fitting to find out the overlap. 
If someone wants to mod these files to better make the overlap clearer/easier, have at it!

OldSchoolDM

